雙組份打膠機使用注意事項及使用壽命
雙組份打膠機在使用過程中很容易因為操作不當造成極其損壞，在使用中要注意一下幾個方面：
In the use of double component glue machine, it is easy to cause extreme damage because of improper operation. In use, we should pay attention to several aspects.
1、在當天機器操作完畢后要把膠管內的膠沖出，防止硬化；如果長時間不實用要注意用煤油清洗膠管和膠槍。
1, after the machine is finished on the same day, the glue in the rubber hose will be washed out to prevent the hardening. If it is not practical for a long time, use kerosene to clean the rubber hose and glue gun.
2、雙組份打膠機使用的硅酮膠或聚硫膠要注意雜質不能過高，低質量的膠容易堵塞膠管的過濾系統，造成出膠不暢或不均勻。
2, the silicone rubber or polysulfide glue used for the two component glue dispenser should pay attention to the impurities can not be too high. The glue with low quality is easy to clog up the filtration system of the rubber hose, resulting in the gel is not smooth or uneven.
3、在更換膠的品種時要特別注意把雙組份打膠機內殘留的膠沖凈，好清洗，因為不同品種甚的膠容易反應堵塞機器。
3, when changing the varieties of rubber, we should pay special attention to the remaining glue in the two component glue machine. We should clean it, because different brands and even the brand glue are easy to react and block the machine.
雙組份打膠機也叫中空玻璃打膠機，是目前中空玻璃比較好的打膠機器，其性能遠超熱熔膠打膠機，使用壽命較長，機器使用壽命在10年左右，操作和保養較好使用時間更長，平時更換易損件即可。
A two-component glue machine also called hollow glass glue machine, hollow glass is currently relatively good glue machine, its performance is far beyond the hot melt glue machine, long service life, the service life of the machine in 10 years or so, the operation and maintenance of good use of time longer, usually worn parts can be.
This article is made up of two component glue machines, more related knowledge, please click: http://www.zkty.org.cn we will use the most advanced technology,
上一篇：小型中空玻璃打膠機常見問題
下一篇：淺析風電葉片設備裂紋維護方法
