如何做雙組份打膠機的日常維護工作
在時代發展迅猛的過程中，越來越多的工廠使用雙組份打膠機來為自己增加產能和產品品質，那你們知道它的日常維護保養工作是怎樣子的呢？小編帶你一起來學習一下如何做
濟南雙組份打膠機的日常的維護工作吧。
In the process of rapid development of the times, more and more factories use two-component gluing machines to increase their production capacity and product quality. Do you know how their daily maintenance work is? Xiaobian will take you to learn how to do the daily maintenance of Jinan two-component gluing machine.
每天工作結束后，應該把設備的機身擦拭干凈，這樣會是設備美觀更持久一些；
At the end of each day's work, the body of the equipment should be cleaned, so that the equipment will be more beautiful and lasting;
每天工作結束后都要排放油水分離器積聚油水；
Drain the oil and water accumulated in the oil-water separator after work every day;
我們要時常不定時地檢查一下氣路油霧器的潤滑油情況，要保證氣動元件的潤滑；
We should check the lubricating oil of the oil mist atomizer of the air circuit from time to time to ensure the lubrication of the pneumatic components;
如果不再連續工作的話，就應該立刻馬上把膠槍里的殘留膠水給干凈；
If you don't work continuously, you should immediately remove the residual glue in the glue gun;
在工作的過程中我們要注意以下各個壓力表的讀數是否都正常，不然會造成產品品質的不良和妨礙正常的生產效率；
In the process of work, we should pay attention to whether the readings of the following pressure gauges are normal, otherwise it will cause poor product quality and hinder normal production efficiency;
每天工作結束之后一定要做好工作日記，方便以后篩查問題所在。
At the end of each day's work, you must keep a work diary so that you can screen the problems in the future.
雙組份打膠機的維護保養工作兩個等級，分別是一級和二級，現在先來說說一級的維護保養工作：每個周都要檢查機械運動部件的連接情況和潤滑情況，如果潤滑度不夠記得要添加潤滑脂；每隔15個工作日就要清洗一次混合器，也可以是半個月清洗一次。
The maintenance of the two-component gluing machine is divided into two levels, i.e. level 1 and level 2. Now let's talk about level 1 maintenance: check the connection and lubrication of mechanical moving parts every week. If the lubrication is not enough, remember to add grease; The mixer should be cleaned every 15 working days or half a month.
接下來就是二級的維護保養工作：每個月都要更換配件有油霧器、閥和主泵、配比泵的潤滑油等；每個月都要把過濾器、針閥清洗一次，還要檢查一次閥的泄壓壓力；每年把主泵、配比泵和輔料泵以及閥都清洗一次。
Next is the second level maintenance work: the accessories to be replaced every month include oil mist, safety valve and lubricating oil of main pump and proportioning pump; Clean the filter and needle valve once a month, and check the relief pressure of the safety valve; Clean the main pump, proportioning pump, auxiliary material pump and safety valve once a year.
The above is what we want to say about the maintenance of the two-component gluing machine. Can you use it as a reference, or should you do the maintenance according to the actual situation of your machine? For more questions, please come to our website http://www.zkty.org.cn Take a look.
上一篇：自動打膠機分別配置多頭跟單頭的原因
下一篇：正確使用打膠機很關鍵
